1: Ecological Monitoring Using Wireless Sensor Networks - Overview, Challenges, and Opportunities

.-

#2: Development of an Embedded System-based Gateway for Environmental Monitoring in .-

#3: Experimental Research Platform for Structural Health Monitoring

.-

#4: A Review of Cooperative Spectrum Sensing in Cognitive Radios

.-

#5: Dielectric Characterisation of Lipid Droplet Suspensions Using the Small Perturbation Technique

.-

#6: Dielectric Properties of Wood for Improved Internal Imaging

.-

#7: Laser-induced Breakdown Spectroscopy Measurements for Dielectric Materials and Metals

.-

#8: Microdevice With Half-Ring Shaped GMR Sensors For Magnetic Bead Manipulation And Detection

.-

#9: Design of Induction Gradiometer for MCG Measurement

.-

#10: Electroacoustic Model Based Pneumatic Fill-level Measurement For Fluids And Bulk Solids

.-

#11: New developments in Electrode Materials for Electrochemical Sensors

.-

#12: Optical Fiber Sensors Based on Lossy Mode Resonances

.-

#13: Ultrasonic Thermometry for Temperature Profiling of Heated Materials

.-

#14: Non-invasive Measurement of Blood Components: Sensors for an in-vivo Haemoglobin Measurement

.-

#15: Cloud Solutions Aimed At Homeland And Security Challenges

.-

#16: Formulation, Characterization and LPG -Sensing Application of CuO - Doped ZnO Thick Film Resistor

.-

#17: Synthesis of Cu-doped SnO2 Thin Films by Spray Pyrolysis for Gas Sensor Application

.-

#18: Nanocystalline In2O3 Thick Film Sensor.

#3: Experimental Research Platform for Structural Health Monitoring

.-

#4: A Review of Cooperative Spectrum Sensing in Cognitive Radios

.-

#5: Dielectric Characterisation of Lipid Droplet Suspensions Using the Small Perturbation Technique

.-

#6: Dielectric Properties of Wood for Improved Internal Imaging

.-

#7: Laser-induced Breakdown Spectroscopy Measurements for Dielectric Materials and Metals

.-

#8: Microdevice With Half-Ring Shaped GMR Sensors For Magnetic Bead Manipulation And Detection

.-

#9: Design of Induction Gradiometer for MCG Measurement

.-

#10: Electroacoustic Model Based Pneumatic Fill-level Measurement For Fluids And Bulk Solids

.-

#11: New developments in Electrode Materials for Electrochemical Sensors

.-

#12: Optical Fiber Sensors Based on Lossy Mode Resonances

.-

#13: Ultrasonic Thermometry for Temperature Profiling of Heated Materials

.-

#14: Non-invasive Measurement of Blood Components: Sensors for an in-vivo Haemoglobin Measurement

.-

#15: Cloud Solutions Aimed At Homeland And Security Challenges

.-

#16: Formulation, Characterization and LPG -Sensing Application of CuO - Doped ZnO Thick Film Resistor

.-

#17: Synthesis of Cu-doped SnO2 Thin Films by Spray Pyrolysis for Gas Sensor Application

.-

#18: Nanocystalline In2O3 Thick Film Sensor.

#7: Laser-induced Breakdown Spectroscopy Measurements for Dielectric Materials and Metals

.-

#8: Microdevice With Half-Ring Shaped GMR Sensors For Magnetic Bead Manipulation And Detection

.-

#9: Design of Induction Gradiometer for MCG Measurement

.-

#10: Electroacoustic Model Based Pneumatic Fill-level Measurement For Fluids And Bulk Solids

.-

#11: New developments in El